
KayO
Purdue, ECE 477 senior design
The main board of a fight-stick game controller that runs from a Li-Po cell or USB. The built board passed every check at the course demo.
I build battery-powered sensor products end to end: the circuit board, the firmware that runs on it, and the path through certification into production.
Lowell, MA

Purdue, ECE 477 senior design
The main board of a fight-stick game controller that runs from a Li-Po cell or USB. The built board passed every check at the course demo.
EVident Battery, Associate Engineering Manager
The Pro runs on EVB-01's board with its own ESP-IDF firmware. I led the program that took it to production, and designed the test bench and AI workflow behind it.
EVident Battery, Electrical Engineer, then Associate Engineering Manager
A Wi-Fi vibration sensor, EVident Battery's first product. I designed its board and wrote its production firmware.
Milwaukee Tool, electrical engineering intern
A MOSFET switch that charges part of a tool's bulk capacitance after the battery is seated, to cut the inrush at insertion.
Purdue IEEE ROV
The electrical stack of the team's 2023-24 vehicle: five boards, down from seven. The team won the Explorer class Technical Documentation Award at the 2024 World Championship.

ECELabs, Purdue ECE teaching labs
A push-button and display shield for the iCE40-HX8K evaluation board, on four layers. I designed two revisions and built both rounds of boards in spring 2024.
ECELabs, Purdue ECE teaching labs
A Python driver that lets a Raspberry Pi set and read an FPGA's pins through eight I2C expanders. The lab's station web apps run on top of it.

Purdue, ECE 477 senior design
The main board of a fight-stick game controller that runs from a Li-Po cell or USB. The built board passed every check at the course demo.

ECELabs, Purdue ECE teaching labs
A narrow four-layer I/O board: one FT4232H puts a seven-segment display, LEDs, switches and push buttons behind a USB port. 25 were ordered assembled.

Purdue, SoCET VIP team
A four-layer test board that joins Purdue SoCET's AFTx05 chip to an FPGA board. It was fabricated, and not fully tested.

ECELabs, Purdue ECE teaching labs
A four-layer carrier: a Raspberry Pi drives an iCE40 FPGA's pins through eight I2C expanders, at about half the first board's area. It went into the lab's stations.
Purdue IEEE ROV
The electrical stack of the team's 2022-23 underwater vehicle, planned at seven boards where the last vehicle had twelve. The vehicle placed 6th of 23 at the 2023 MATE World Championship.

ECELabs, Purdue ECE teaching labs
A first carrier that replaces jumper wires with eight I/O expanders between a Raspberry Pi 4B and an iCE40-HX8K FPGA. Its I2C line, reworked as v1.2 and v1.3, went into the lab.

Purdue, SoCET VIP team
A two-layer shield that gives the AFTx06 chip's board a CAN bus port. It was graded 100/100, and I used it to teach new members board design.

Purdue IEEE ROV
A step-down board that made the 2021-22 ROV's 5.2 V and 3.3 V rails from 12 V. Its second revision steadied the 5.2 V rail.
Before Purdue
A motorcycle lock that opens for an RFID chip implanted in its owner's hand, and a 13.56 MHz card reader and writer. At least seven prototypes got the lock onto the motorcycle.
Associate Engineering Manager, EVident Battery
Apr 2026 to present
Electrical Engineer, EVident Battery
Mar 2025 to Apr 2026
Electrical Engineering Intern, Milwaukee Tool
Jun to Aug 2024